T-Brick 2.0 | Portable Titanium Wood Stove for Hot Tent Camping | Zpoint New Arrival
-
Detail
T-Brick 2.0 Titanium Stove
More and more strong.
New titanium chimney system (7cm)
New titanium spark arrestor
New air intake side panel
New firebox bottom plate
Overall 1mm thickness TA1 titanium
Titanium detachable baffle
Adjustable and detachable smoke damper
Three-Dimensional reinforced structure top cover
Free switching side panels
Unique octagonal glass side panel
Strengthening firebox
Lengthened front door air intake
Ultralight titanium side shelves
Hollow whole plate folding titanium stove legs
New Titanium Chimney System - 7cm
Ultralight titanium spark arrestor and chimney.Embedded inverted chimney damper base.Comes with 3 wind rope fixing rings.
New Firebox Bottom Plate
Add air intakes on both sides of the bottom plate.Reduce the blackening of the glass and improve the burning efficiency at the rear.
New air intake side panel
Improve the deformation resistance, maximum secondary burning efficiency.
Three-Dimensional strengthening firebox
Enhance the rigidity of the titanium wood stove and minimize deformation.
Hollow whole laser cutting plate folding stove legs
Non touch welding structure, enhance stability.
Titanium detachable baffle
Increase the maximum heat output of camping wood stove.
Surface polishing treatment
Improve fatigue resistance of metal.
Octagonal glass side panel
Observe the burning situation.
Adjustable and detachable damper
Control the intensity of the wood burning.
Adjustable sliding air intake Control
Control wood burning rate.
Folding and panel design
Stove Type Portable titanium wood Stove Carrying Weight 7.5 lb / 3.4 kg Folding Dimension 15.4 x 7.9 x 3.2 in (39 x 20 x 8 cm) Firebox Dimension 15.4 x 7.9 x 7.1 in (39 x 20 x 18 cm) Assembly Dimension 15.4 x 7.9 x 11.2 in (39 x 20 x 28.5 cm) Side Glass Size 11.4 x 3.9 in (29 x 10 cm) Pipe Length (Storage) 11.02 in / 28 cm Pipe Length 6.56ft / 2m or 9.84ft / 3m Pipe Diameter 2.76 in / 7 cm Spark Arrestor Yes Material 1mm Thickness Titanium (GR1/TA1) Firebox Volume 14L
WHAT'S INCLUDED:
T-Brick 2.0
Titanium Chimney
Titanium Smoke Damper Base
Titanium Spark Arrestor
Cut Resistant Gloves
Detachable Baffle
Stove Bag
*Tools (titanium screw and wrench)
2.0 TITANIUM CHIMNEY SYSTEM - 7CM/2.76IN
Ultralight spark arrestor, three detachable rings for wind ropes fixing.
Reduce the hollow area, the convex is good for catching sparks.
Upgraded to embedded inverted. (Used with titanium section chimney)
2.0 FIREBOX BOTTOM PLATE
Add air intakes on both sides of the bottom plate, reduce the blackening of the glass and improve the burning efficiency at the rear.
REINFORCED STOVE TOP COVER
The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover. Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover. After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.
Tips: The portable tent stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the portable wood stove to rise and fall continuously, which will eventually cause the top cover to warping.
DETACHABLE BAFFLE
The detachable baffle can maximize the burning heat efficiency of the wood.
The air enters the firebox through the side air intake panel, which can allow the smoke generated by the burning wood to be reburnt, the heat can be concentrated inside the stove to increase the temperature of the backpacking tent stove . At the same time, there will be less smoke from burning wood.
REINFORCED BOTTOM PLATE
Under the condition of ensuring light weight and portability, T-Brick 2.0 adopts a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the deformation of the furnace after burning. 12 hollow octagons can enhance the heat dissipation effect.
After the folding tent stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.
NEW FOLDING LEGS
T-Brick 2.0 legs are made of a whole piece of titanium plate, which has a stronger bearing structure.
The raised design in the middle of the camping tent stove legs are suitable for uneven ground.
2.0 SIDE PANELS
Compared with the T1 series, the side panels of T-Brick can be switched freely.
Inside the tent, we can face the glass side panel and observe the burning of the wood.
The glass side panel also provides light in your hot tent.
The new secondary intake side panels have been redesigned to be stronger and less deformable after burning.
NEW STOVE DOOR / TAIL PLATE
The door of the T-Brick 2.0 Collapsible Wood Stove was widened and heightened so that large pieces of wood to enter the stove easily.
The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the Folding Wood Stove. We can use the ashes rake to remove the ashes after burning.
The reinforcing plate of the tail plate can ensure that the tail plate will not be deformed.
TOP COVER LOCK CATCH
The lock catch on the T-BRICK Camping Wood Stove was designed so that side shelves can be used with it.
When used with the side shelves, it can also enhance the stability of the Portable Wood Stove.
FRONT DOOR AIR INTAKE
T-BRICK Camping Fire Stove has a door with a slidable air intake and an octagonal glass, so that you can fine-tune the burn rate.
The area of the air intake was increased by 15%, which allows the Portable Tent Stove to heat up the tent in a very short time in the cold winter.
NEW STOVE BAG
The new designed stove bag is more durable, with YKK zipper, more portable.
